| Security code： | huininggroupgYVOU9PC4i9ciWx755 |
|---|---|
| browse： | |
| add time： | 2016-01-18 08:55:52 |
| recommendation： |  |
UHZ-517C series side mounted magnetic liquid level gauge is suitable for installation in the side of various towers, tanks, tanks, spherical vessels and boilers and other equipment, for a variety of medium level detection. Products can be high sealing, leak proof, due to the liquid medium and the indicator is completely isolated, the measurement of liquid level is very safe, reliable, durable. The whole process of no measuring blind area showed marked visual reading and large measuring range, with a liquid level alarm, a control switch, the liquid level or level and lower limit alarm and control, with LB type liquid level transmitter, the liquid level signal is converted into second tier 4 ~ 20mADC standard
Quasi signal, to achieve remote detection, indication, recording and control. Products are widely used in electric power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, food and other industries in the production process of the liquid level measurement and control.
Depending on the product application, a series of products have different forms, see the series table.
UHZ-517C clamping sleeve type magnetic turnover column liquid level gauge is suitable for the liquid level measurement in the system of petroleum chemical industry, such as anti freezing, heat preservation and heating. Clip type steam jacket and a circulating water jacket, vacuum jacketed and explosion-proof electric heating system is advanced.
Structure principle
Level gauge structure based on by-pass pipe principle, the leading level of inner tube, and a container device within the liquid level height consistent, according to Archimedes theorem, magnetic float in the liquid produced by buoyancy and gravity balance, float to float on the surface of the liquid, when tested in the container level lift, liquid level meter leading the float tube also subsequently lift, permanent magnets in float through magnetic coupling drive indicator of the red and white pole turning 180 degrees. When the liquid level rises, the turning column turned from white to red, when the liquid level drops, turning column turn from red to white, an indicator of red and white circles at for the actual height of containers within the medium level, so as to realize liquid level indicator.
Main technical parameters
Measurement range: 150 ~ 8000mm, the center distance of more than 8000mm or transport conditions do not allow more than the length of the liquid level meter can be used to manufacture.
On the UHZ-517C15A type, the center distance of more than 6000mm using segmented manufacturing.
Working temperature: -40~450 C (see table of products and temperature and pressure gauge)
Working pressure: -0.1~25MPa (see table of series and product temperature and pressure gauge)
Medium viscosity: less than or equal to 0.4Pa.S. For the viscosity of the medium or low temperature easy crystal medium, can be selected heating jacket Taoxing liquid level meter
Connecting flange: PN0.6~25 DN20~DN50
Flange standards: the Ministry of chemical industry in 1998 promulgated the latest HG20592-20635-97 flange standards, other flange standards (such as GB, ANSI, DIN and other standards), please specify the user when ordering.
Material: bypass pipe 1Cr18Ni9Ti; 304; 316L
Float: 1Cr18Ni9Ti; 316; titanium
Classification of main material:
Stainless steel 1Cr18Ni9Ti, stainless steel 304SS, stainless steel 316, stainless steel 316L, etc.
