<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0">
<channel>
<title>Dynamics-Anhui HuiNing Electric Instrument Group Co., Ltd.</title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=list&catid=9]]></link>
<description>11Dynamics-Anhui HuiNing Electric Instrument Group Co., Ltd.</description>
<item id="1">
<title><![CDATA[Outstanding employees of our company: Comrade Wu Xiang&#039;s personal deeds]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=585]]></link>
<description><![CDATA[Comrade Wu Xiang&#39;s personal deedsComrade Wu Xiang, high school education level, in October 2014 to enterprises, with before in Qiao Tian Baolong instrument factory engaged in lathe machining work experience, the company started soon, things are willing to use their brains. Two years has been in the instrument shop unity colleagues, practical work, and therefore was named outstanding class leader&quot;.Lathe precision machining is an important part of the production of enterprise instrumentation products, its requirements are very strict. Lathe just learning, in order to exercis…]]></description>
<pubDate>2016-06-08 17:51:17</pubDate>
</item>
<item id="2">
<title><![CDATA[In recognition of the general assembly of Tianchang &quot;top ten craftsman&quot;]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=584]]></link>
<description><![CDATA[]]></description>
<pubDate>2016-06-08 17:50:12</pubDate>
</item>
<item id="3">
<title><![CDATA[Notice on carrying out the &quot;Tianchang ten craftsman&quot; recommended selection activities]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=583]]></link>
<description><![CDATA[]]></description>
<pubDate>2016-06-08 17:46:42</pubDate>
</item>
<item id="4">
<title><![CDATA[My company in Tianchang in 2016 to obtain outstanding achievements in the skills competition]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=582]]></link>
<description><![CDATA[]]></description>
<pubDate>2016-06-08 17:44:07</pubDate>
</item>
<item id="5">
<title><![CDATA[Anhui Hui Ning - Specification for installation and acceptance of electric wire and cable (five)]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=581]]></link>
<description><![CDATA[The fifth chapter of the cable layingSection 1 General ProvisionsArticle 5.1.1 before laying the cable should be checked according to the following requirements:A cable channel, good drainage. Coating the metal part of the whole. To meet the requirements of the tunnel lighting, ventilation. Two, cable type, voltage, specifications should comply with the design.Third, the appearance of the cable should be no damage, good insulation, when the cable seal doubt should be moist judgment; buried cable and underwater cables should be qualified by the test.Four, the hydraulic oil filled ca…]]></description>
<pubDate>2016-04-06 17:38:22</pubDate>
</item>
<item id="6">
<title><![CDATA[Anhui Hui Ning - Specification for installation and acceptance of electric wire and cable (four)]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=580]]></link>
<description><![CDATA[Preparation and installation of cable support in the fourth chapterArticle 4.0.1 the processing of a cable bracket shall meet the following requirements:One, the steel should be straight, no obvious distortion. Cutting error should be in the range of 5mm, the cut should not have the edge, burr. Two, support should be welded firmly, no significant deformation. The vertical spacing and design deviation of each cross brace should not be greater than 5mm. Three, metal cable bracket must be anti-corrosion treatment. In the area of hot and humid, salt fog and chemical corrosion, the desi…]]></description>
<pubDate>2016-04-06 17:37:18</pubDate>
</item>
<item id="7">
<title><![CDATA[Anhui Hui Ning - Specification for installation and acceptance of electric wire and cable (three)]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=579]]></link>
<description><![CDATA[The third chapter processing and laying cable pipeThe 3.0.1 cable pipe should not have perforation, crack and obvious uneven, wall should be smooth; metal cable pipe should not have severe corrosion. Hard plastic pipes shall not be used in places where the temperature is too high or too low.In susceptible to mechanical injury and local stress in the relatively large buried, enough strength pipe should be used. Article 3.0.2 cable tube processing should meet the following requirements:A nozzle should be free of burrs and sharp edges, should be made of horn shaped orifice.Second, the…]]></description>
<pubDate>2016-04-06 17:34:56</pubDate>
</item>
<item id="8">
<title><![CDATA[Anhui Hui Ning - Specification for installation and acceptance of electric wire and cable (two)]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=578]]></link>
<description><![CDATA[Transport and storage in the second chapterArticle 2.0.1 in the course of transportation and handling, the cable and cable tray shall not be damaged. It is strictly prohibited to push the cable tray directly from the car. Cable tray should not be put on flat, flat storage.Before the carriage or rolling of the cable tray, the cable tray must be firmly set, and the cable is wound around the 2.0.2. Oil filled cable to the oil pipe between the pressure should be fixed, not damage. The pressure tank should be firm, and the pressure indicator should be in accordance with the requirements…]]></description>
<pubDate>2016-04-05 17:33:40</pubDate>
</item>
<item id="9">
<title><![CDATA[Anhui Hui Ning - Specification for installation and acceptance of electric wire and cable installation (1)]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=577]]></link>
<description><![CDATA[general provisionsArticle 1.0.1 in order to ensure the construction quality of cable installation work, promote the improvement of the technical level of the cable line construction, ensure the safe operation of the cable line, and make this code.Article 1.0.2 This specification is applicable to the construction and acceptance of power cables, control cables and installation works of 500kV and below.The installation of cable lines with special requirements in mines, ships, metallurgy, chemical industry, etc. shall be in accordance with the relevant provisions of the professional pr…]]></description>
<pubDate>2016-04-05 17:31:11</pubDate>
</item>
<item id="10">
<title><![CDATA[Anhui Hui Ning - the development of new material and new technology for cable accessories]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=574]]></link>
<description><![CDATA[Based on the currently power system of 35 kV and below different kinds of cable attachment type, based on the direction of development of medium voltage cable accessories &quot;prefabricated&quot;, &quot;simplicity&quot;, introduces the part of current in cable accessories technology development and research in the process of new materials and new technologies.introductionWith the acceleration of urbanization and the improvement of living standards of urban and rural areas, the proportion of cable applications in urban distribution networks, especially in large and medium sized cit…]]></description>
<pubDate>2016-03-04 09:42:18</pubDate>
</item>
<item id="11">
<title><![CDATA[Anhui Hui Ning - conductor ice dancing, overload, ice flash fault]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=571]]></link>
<description><![CDATA[In severe cold weather, ice dancing, overload, ice flash easily lead to the following failure:(1) conductor galloping on transmission line under ice, causing damage to the line equipment;(2) the ice melts, easily formed on the surface of the ice bridge insulator, if the insulator pollution is serious, prone to icing flashover;(3) the lead wire icing overload, which will cause the tower head compression yield deformation and inverted tower line and other accidents.In view of the above situation, the main measures to be taken are as follows.(1) dance control. In line dancing section …]]></description>
<pubDate>2016-03-03 15:33:13</pubDate>
</item>
<item id="12">
<title><![CDATA[Anhui Hui Ning - rubber insulated wire and cable profiles]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=566]]></link>
<description><![CDATA[&nbsp;Rubber insulated wire and cable:Rubber insulated wire and cable has experienced more than one hundred years of development history, he is the oldest of all wire and cable products in the history of the species, many of its types, widely used in all types of wire and cable. Rubber insulated wire and cable has excellent electrical insulation properties, chemical stability, especially in the other wire and cable can not be compared to the flexibility and better physical propertiesRubber insulated wire and cable has excellent electrical insulation properties, chemical stability, …]]></description>
<pubDate>2016-02-26 17:30:10</pubDate>
</item>
<item id="13">
<title><![CDATA[Anhui Hui Ning - wire and cable which metal materials used it?]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=564]]></link>
<description><![CDATA[Which kind of metal materials are often used for wire and cable? Wire and cable manufacturers, copper, silver, aluminum, gold, nickel, zinc, tin are wire and cable to use metal materials Oh. Below is a detailed description of Anhui Hui Ning wire and cable manufacturers:Copper: second only to silver, thermal conductivity, second only to gold and silver; corrosion resistance, no magnetism, good plasticity, easy to weld, widely used. Copper alloy is mainly to improve the wear resistance, corrosion resistance and mechanical properties of copper.Silver: metallic conductivity and thermal…]]></description>
<pubDate>2016-02-26 17:26:11</pubDate>
</item>
<item id="14">
<title><![CDATA[Anhui Hui Ning - decoration wiring should pay attention to the matter]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=563]]></link>
<description><![CDATA[Usually case, residents in the renovation of the new house, walk the line is essential for a job; wire and cable manufacturers said, now indoor circuit wiring, switch socket arrangement, chandeliers, ceiling fan installation, for the sake of convenience, the pursuit of beauty, material saving, to not in accordance with the rules of the device are, thus planting under the hidden dangers of accidents. So wire and cable manufacturers need to remind everyone: in the decoration wiring, the staff should do the following:1, in your house into the line, be sure to install with the current …]]></description>
<pubDate>2016-02-26 17:25:01</pubDate>
</item>
<item id="15">
<title><![CDATA[Pressure gauge use note]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=42]]></link>
<description><![CDATA[Note in the purchaseThe following points should be clearly defined in the purchase and order of the general pressure gauge:1 instrument name: to be clear is the general pressure gauge, oxygen pressure gauge, electric contact pressure gauge, ammonia pressure meter, etc.;2 instrument model: different manufacturers have different models, but to be clearly written in the contract;The 3 meter diameter size: Phi 40, Phi 60, Phi 100, Phi 150, Phi 200, Phi 250.4 installation: radial, axial, belt, belt behind the front.5 measurement range: vacuum gauge - -0.1MPaPressure gauge - measuring ca…]]></description>
<pubDate>2016-01-12 09:38:42</pubDate>
</item>
<item id="16">
<title><![CDATA[Analysis of common failures and main causes of pressure gauge]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=41]]></link>
<description><![CDATA[The pressure gauge is widely used in instrumentation industry, almost every field can be applied to different products, with the expansion of the market, we produced is also a wide range of products, types of products our customers need we all will be one of the research, thereby increasing the types of products and customers demand, with the increase of product categories, using the instrument will always appear some small fault, today we analysis is pressure gauge common fault and its main causes.One, the pressure gauge is not allowed1, the impact of the temperature is not instal…]]></description>
<pubDate>2016-01-12 09:37:29</pubDate>
</item>
<item id="17">
<title><![CDATA[Factors affecting the accuracy of pressure gauges]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=40]]></link>
<description><![CDATA[1, freezing, vibration: pressure gauge installed outside the boiler, is influenced by the external conditions. If the outside temperature is too low, frozen, or from boiler and pressure gauge vibration inside, will be on the sensitivity and accuracy of the pressure gauge pointer impact. Preventive measures: one is to install heat insulation device; two is to install a buffer device, such as the three way cock is a shockproof device.2, the effect of temperature: the pressure gauge pressure is the pressure that the spring bending deformation. If the medium temperature is higher, the …]]></description>
<pubDate>2016-01-12 09:35:01</pubDate>
</item>
<item id="18">
<title><![CDATA[Method for measuring error of WSS double metal thermometer]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=39]]></link>
<description><![CDATA[WSS bimetal thermometer is usually by around a spiral shaped temperature sensing element - double metal piece, connecting rod, a pointer shaft, indicator member and a protective tube. WSS bimetal thermometer main dimension series and installation fixing device, which comprises a protective tube diameter, insertion length, thread installation size, in order to achieve universal and swap, as far as possible with the thermal resistance, thermocouple agree.The basic error test method of pressure type thermometer and WSS double metal thermometer is the same as the method of thermal resi…]]></description>
<pubDate>2016-01-12 09:33:00</pubDate>
</item>
<item id="19">
<title><![CDATA[Selection of double metal thermometer and installation notes]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=38]]></link>
<description><![CDATA[In the selection of double metal temperature time to fully consider the actual application environment and requirements, such as the dial diameter, the accuracy level, the installation of fixed, measured medium types and environmental risks, etc.. In addition, but also pay attention to cost and maintenance of the workload and other factors. In addition, the use of dual metal thermometer should pay attention to the following points:1, double metal thermometer protection tube immersed in the measured medium length must be greater than the length of the temperature sensing element, th…]]></description>
<pubDate>2016-01-12 09:31:42</pubDate>
</item>
<item id="20">
<title><![CDATA[Industrial thermocouple common sense]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=37]]></link>
<description><![CDATA[- OverviewIndustrial thermocouple as the temperature measurement sensor, usually and display instruments, recording instruments and electronic regulating equipment use, it can be directly measured in various production processes 0~1800 DEG C liquid, steam and gas medium and solid surface temperature.If the temperature transmitter is connected with the output of 4~20mA, 0~10V and other standards of current and voltage, the use of more convenient and reliable.The structure and principleThermocouple assembly is composed of a temperature sensing element (thermocouple core), fixed devic…]]></description>
<pubDate>2016-01-12 09:30:00</pubDate>
</item>
<item id="21">
<title><![CDATA[Thermocouple field notes and installation requirements]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=36]]></link>
<description><![CDATA[Temperature measuring instruments commonly used in the temperature measuring element, the direct measurement of the temperature and the temperature signal is converted into a thermoelectric EMFs signal, through the electric instrument (two meters) into the temperature of the measured medium. Thermocouple installation methods are: the main fixed methods are threaded connections, flange connections and welding, the applicable occasions and requirements are different, mainly in accordance with the pressure, temperature and other parameters to set. So what should we pay attention to wh…]]></description>
<pubDate>2016-01-12 09:28:59</pubDate>
</item>
<item id="22">
<title><![CDATA[Definite concept and advantages and disadvantages of flame retardant cable, halogen free cable and fire resistant cable]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=35]]></link>
<description><![CDATA[Flame retardant cable is characterized by a delay in the flame spread along the cable so that the fire does not expand. Because of its low cost, so it is widely used in a variety of cable. Whether it is a single cable and beam laying conditions, cable know combustion can control the spread of flame in a certain range, so you can avoid fire flame-retardant caused by major disasters, in order to enhance the level of fire prevention of cable line.No halogen low smoke flame retardant cable is characterized not only has good flame retardant performance, and constitute a low smoke zero h…]]></description>
<pubDate>2016-01-12 09:26:31</pubDate>
</item>
<item id="23">
<title><![CDATA[Section selection of the power cable, which should be in accordance with the provisions?]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=34]]></link>
<description><![CDATA[The choice of power cable shall comply with the following principles:(1) the rated voltage of the cable shall be greater than or equal to the rated voltage of the power supply system of the installation point;(2) cable continuous permissible current should be equal to or greater than the maximum continuous current load;(3) core cross section to meet the stability requirements of the short circuit power supply system;(4) according to the length of the cable check whether it meets the requirements of voltage drop;(5) the minimum short-circuit current at the end of the line should be …]]></description>
<pubDate>2016-01-12 09:25:48</pubDate>
</item>
<item id="24">
<title><![CDATA[Installation and construction of electric wire and cable]]></title>
<link><![CDATA[http://english.huininggroup.com/index.php?case=archive&act=show&aid=33]]></link>
<description><![CDATA[The design and construction of cable laying installation should be carried out according to the &quot;GB 50217-94 power cable engineering design specifications&quot; and other relevant provisions, and the cable accessories necessary (terminals and joints). The operation of power supply system of quality, safety and reliability is not only related with the quality of wire and cable, and cable accessories and line construction quality.According to the statistical analysis of line fault, fault fault caused much more possibility for construction, installation and connection and other f…]]></description>
<pubDate>2016-01-12 09:25:07</pubDate>
</item>
</channel>
</rss>